GE Fanuc | 9070 | GE Fanuc 90-70 PLC

IC697MEM732 Image


Same Day - Free Shipping

  • Manufacturer: GE Fanuc
  • Description: Exp. RAM, 256K Bytes, Non-volatile Flash, 32 Bit (Used w/78X CPUs)
  • Weight: 4 lbs :: ≈ 2 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC697MEM732 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -BA, -BB, -BC, -CD, -DE, -EE, -EG, -EH,

Product Manual Excerpt

Features Available in 128 KBytes, 256 KBytes w/256 KBytes non-volatile flash memory, 256 KBytes and 512 Kbytes. For expansion of CPU 780/781/782/788/789. Memory retained by battery on CPU. Does not require additional slot. Configurable for data and program storage. Error checking by CPU checksum routine. Installation requires only a #1 Phillips screwdriver. Field Installable. Parity generation and checking for each byte of SRAM. Functions CMOS Expansion Memory is available in four versions; 128 KBytes, 256 KBytes w/256 KBytes non-volatile flash memory, 256 KBytes and 512 Kbytes. This memory must be used to provide logic and data memory in the PLC CPU 780/781/782/788/789 Central Processor Unit modules. It is installed as a daughter board and resides in the same slot as the module it serves. This board is required for proper operation of these CPUs since the base board contains no RAM memory. Memory is retained in the event of power loss by the battery on the base board housing. Flash memory is retained in the event of a power loss with or without the battery connected. Logic program memory is continually error-checked by the PLC CPU as a background task. Memory parity errors are reported to the PLC CPU when they occur. a44437 Figure 1. Example of 32-Bit CMOS Expansion Memory Board MS-DOS and Windows are registered trademarks of Microsoft Corporation. GFK-0531E 32-Bit CMOS Expansion Memory 2 Expansion Memory August 1997 Series 90 -70 Programmable Controller Data Sheet Manual GFK-0600F 33-2 Installation Installation should not be attempted without referring to the Programmable Controller Installation Manual and applicable data sheets (Refer to References 3, 4, 5 and 6). Align the expansion memory board and CPU connectors. Align the captive screws on the expansion memory board with the standoffs already installed on the CPU. Push the expansion memory board onto the CPU connector ensuring that the mating screws remain aligned with their respective standoff. Screw each expansion memory board screw into the standoffs with a #1 Phillips screwdriver, firmly tightening each screw. Make sure rack power is off before installing the CPU module. Place module in rack. Turn power on. Clear memory with MS-DOS or Windows programming software following instructions in the Programming Software User s Manual (Refer to Reference 1). Batteries The Lithium battery (IC697ACC701) is installed as shown in Figure 2. This battery maintains user memory when power is removed and operates the calendar clock on the PLC CPU. Be sure to install the new battery before removing the old battery. Specific indication of a low battery state is detailed in References 3, 4 and 5. MEMORY PROTECT a45157 OPEN REPLACEMENT BATTERY CONNECTOR EXPANSION MEMORY BOARD IC697MEM731 IC697MEM732 IC697MEM733 IC697MEM735 CPU 781 CURRENTLY INSTALLED BATTERY CONNECTOR MEMORY PROTECT KEY SWITCH MODULE IC697CPU781 LABEL 44A726758-128R01 SERIAL PORT USE THIS MODULE IN SLOT 1 ONLY CPU 781 TOP MODULE OK RUN OUTPUTS ENABLED ON = OK, ENABLED, PROTECTED FRONT RUN WITH OUTPUTS ENABLED RUN WITH OUTPUTS DISABLED STOP KEY POSITION MODULE FUNCTION 16MHz 32 BIT CENTRAL PROCESSING UNIT BATTERY CONNECTORS INSTALL NEW BATTERY BEFORE UNPLUGGING OLD BATTERY. USE IC697ACC701 ONLY RS-485 COMPATIBLE REMOTE PROGRAMMER MEMORY PROTECT REMOTE PROGRAMMER LED STATUS INDICATORS Figure 2. Example of Location of Expansion Memory and Battery on CPU 780/781/782/788/789 (CPU781 Shown) 3 32-Bit CMOS Expansion Memory GFK-0531E Expansion Memory August 1997 Series 90 -70 Programmable Controller Data Sheet Manual GFK-0600F 33-3 Table 1. References Reference Title 1 Programming Software User s Manual 2 Programmable Logic Controller Reference Manual 3 Programmable Controller Installation Manual 4 Data Sheet for IC697CPU781, 32-Bit, 16 MHz, Expandabale 5 Data Sheet for IC697CPU782, 32-Bit, 16 MHz, Expandabale, Floating Point 6 Data Sheet for IC697CPU780, 32-Bit, 16 MHz, Expandabale, Floating Point, for Redundancy Applications 7 Data Sheet for IC697CPU788/789 32-Bit, 16 MHz, Expandabale for Genius Triple Redundancy Systems Table 2. Specifications for CMOS Expansion Memory Modules Battery Shelf life: Memory retention: 10 years at 20 C (68 F) 6 months nominal without applied power Current required form 5V bus: 2.25 amps (includes expansion memory board and CPU module) VME System designed to support the VME standard C.1 Refer to GFK-0867B, or later for product standards and general specifications. Table 3. Ordering Information Description Catalog Number 128 KByte, 32-Bit CMOS Expansion Memory IC697MEM731 256 KByte w/256 KByte Non-Volatile Flash memory, 32-Bit CMOS Expansion Memory IC697MEM732 256 KByte, 32-Bit CMOS Expansion Memory IC697MEM733 512 KByte, 32-Bit CMOS Expansion Memory IC697MEM735 Lithium Battery IC697ACC701 Note: For Conformal Coat option, or Low Temperature Testing option please consult the factory for price and availability.

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180. We can help you with your Revision specific needs.

UPS Ground shipping is always FREE!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is in the original manufacturer’s packaging with all sub-assemblies and documentation. Comes with a PDF Electric & Supply 3-year warranty.

UPS Ground shipping is always FREE!

What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Electric & Supply packaging and includes a PDF Electric & Supply 3 Year Warranty.

UPS Ground shipping is always FREE!

What is Reconditioned?

Reconditioned products from PDF Electric & Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

Our Reconditioned Products always come with a PDF Electric & Supply 2-Year Warranty.

UPS Ground shipping is always FREE!

Repair Service

3-5 Days for most repairs. 24 hour repair upon request at no extra charge. If part is unrepairable, we will exchange with a working unit or return unrepaired.