GE Fanuc | 9070 | GE Fanuc 90-70 PLC

IC697MEM715 Image


Same Day - Free Shipping

  • Manufacturer: GE Fanuc
  • Description: Expansion RAM, 128K Bytes, CMOS (Used w/77X CPUs and PCM)
  • Weight: 4 lbs :: ≈ 2 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC697MEM715 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -BA, -BB, -BC, -CD, -DD, -DE, -EE, -EG, -EH,

Product Manual Excerpt

Features Available in 64, 128, 256 and 512 Kbytes For expansion of CPU 771, CPU 772, or PCM Memory retained by battery on CPU or PCM Does not require additional slot Configurable for data and program storage Error checking by CPU checksum routine No tools required for installation Field Installable Functions This CMOS Expansion Memory is available in four versions; 64, 128, 256 and 512 Kbytes. This memory may be used to expand logic and data memory in either the CPU 771 (IC697CPU771) and CPU 772 (IC697CPU772) modules, or the Programmable Coprocessor Module (IC697PCM711). It is installed as a daughter board and resides in the same slot as the module it serves. Memory on this board supplements memory available on the base board. a44742 Memory is retained in the event of power loss by the battery on the base board housing. Logic program memory is continually error-checked by the PLC CPU as a background task. The PCM error checks storage memory when power is cycled and on hard or soft resets. MS-DOS and Windows are registered trademarks of Microsoft Corporation. GFK-0160F CMOS Expansion Memory 2 Expansion Memory August 1997 Series 90 -70 Programmable Controller Data Sheet Manual GFK-0600F 32-2 Installation Installation should not be attempted without referring to the applicable Programmable Controller Installation Manual (See reference 4). Make sure rack power is off. Plug the 64 pin connector into the connector on the base board, and engage snaps. Place module in rack. Turn power on. CPU Installation: Clear memory using either MS-DOS or Windows programming software following instructions in the Programming Software User s Manual (See reference 1). PCM Installation: For the PCM follow the instructions in the Programmable Coprocessor Module Support Software User s Manual (See reference 3). Batteries The Lithium battery (IC697ACC701) is installed as shown in figure 1. This battery maintains user memory when power is removed and operates the calendar clock on the PLC CPU. Be sure to install the new battery before removing the old battery. Specific indication of a low battery state is detailed in References 3 and 4. a42711 OPEN REPLACEMENT BATTERY CONNECTOR CURRENTLY INSTALLED BATTERY CONNECTOR EXPANSION MEMORY BOARD IC697MEM713 IC697MEM715 IC697MEM717 IC697MEM719 CPU 771 CPU 771 MODULE OK RUN OUTPUTS ON = OK, ENABLED MODULE IC697CPU771 LABEL 44A726758 106 MODULE FUNCTION 12MHZ CENTRAL PROCESSING UNIT BATTERY CONNECTIONS SERIAL PORT RS 422 COMPATIBLE INSTALL NEW BATTERY BEFORE UNPLUGGING OLD BATTERY. USE IC697ACC701 ENABLED USE THIS MODULE IN SLOT 1 ONLY RUN WITH OUTPUTS ENABLED RUN WITH OUTPUTS DISABLED STOP Figure 1. Location of Expansion Memory and Battery on CPU771/772 and PCM 3 CMOS Expansion Memory GFK-0160F Expansion Memory August 1997 Series 90 -70 Programmable Controller Data Sheet Manual GFK-0600F 32-3 Table 1. References Reference Title 1 Programming Software User s Manual 2 Programmable Controller Reference Manual 3 Programmable Coprocessor Module and Support Software User s Manual 4 Programmable Controller Installation Manual Table 2. Specifications for IC697MEM713/715/717/719 Battery Shelf life 10 years at 20 C (68 F) Memory retention 6 months nominal without applied power. VME System designed to support the VME standard C.1 Refer to GFK-0867B, or later for product standards and general specifications. Table 3. Ordering Information Description Catalog Number 64 Kbyte CMOS Expansion Memory IC697MEM713 128 Kbyte CMOS Expansion Memory IC697MEM715 256 Kbyte CMOS Expansion Memory IC697MEM717 512 Kbyte CMOS Expansion Memory IC697MEM719 Lithium Battery IC697ACC701 Note: For Conformal Coat option, or Low Temperature Testing option please consult the factory for price and availability.

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180. We can help you with your Revision specific needs.

UPS Ground shipping is always FREE!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is in the original manufacturer’s packaging with all sub-assemblies and documentation. Comes with a PDF Electric & Supply 3-year warranty.

UPS Ground shipping is always FREE!

What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Electric & Supply packaging and includes a PDF Electric & Supply 3 Year Warranty.

UPS Ground shipping is always FREE!

What is Reconditioned?

Reconditioned products from PDF Electric & Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

Our Reconditioned Products always come with a PDF Electric & Supply 2-Year Warranty.

UPS Ground shipping is always FREE!

Repair Service

3-5 Days for most repairs. 24 hour repair upon request at no extra charge. If part is unrepairable, we will exchange with a working unit or return unrepaired.